Skip to content
Toggle mobile menu
Oxygen Sensor Extension Harness
FWD 2nd Gen VQ35DE swap
Dyno / Tuning
Transmission/ Flywheel / Clutch
Intakes / Manifold
BC Racing Coilovers
Stainless Steel Brake Hoses
Merchandise / Decals
Blog / News
FWD 2nd Gen VQ35DE Swap How to Guide
NISformance Drag Car
Nav Menu 2
Technical / How To
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Intakes / Manifold
VQ35DE FWD 2nd gen Hi Ram Adapter
Stock Status:In stock
Adapter kit to utilize a Holley hi-ram style upper lid on FWD 2nd gen VQ35DE engines!! This is for serious performance applications where high rpm power is a must! The adapter utilizes the OEM gasket where it mates to the lower plenum.
Added some dyno testing results! We have seen insane top end gains with the hiram intake manifold setup. What it needs is RPM! The higher the rpm the more it gains! Basically you trade some low end/midrange power for top end power, which for most forms of racing top end power is critical. By chaining headers/exhaust you can minimize the midrange losses as you can see from some of the test some cars didnt lose as much midrange.
The largest gain we have seen so far is 50hp at 8000 rpm!!!!!!!!!
We are doing more testing and will add more results soon!
Required to complete installation:
Upper lid (Holley lid p/n 300-245 works)
LS throttle body (90mm or 87mm) (or we have an adapter to run Nissan 75mm tb)
Cut the webbing part of hood for proper clearance
NISformance 3" Cold Air Intakes HR/VHR
NISformance 3" Mid Length Intake FWD VQ35DE
NISformance 3" Full Cold Air Intake FWD VQ35DE
NISformance 3.5" Mid Length Intake FWD VQ35DE
NISformance 3.5" Full Cold Air Intake FWD VQ35DE
VQ35DE SSIM gutted manifold service
VIAS Vacuum Hose Kit 2nd Gen VQ35DE
VQ TB adapter for Hi Ram Manifold
Share your knowledge of this product.
Be the first to write a review »